Company profile - Canadian Company Capabilities

Third-Party Information Liability Disclaimer

Some of the information on this Web page has been provided by external sources. The Government of Canada is not responsible for the accuracy, reliability or currency of the information supplied by external sources. Users wishing to rely upon this information should consult directly with the source of the information. Content provided by external sources is not subject to official languages, privacy and accessibility requirements.

Integran Technologies Inc.

Company name(s)

Legal/Operating Name
Integran Technologies Inc.

Company contact information

Mailing address

6300 Northam Dr.
MISSISSAUGA , Ontario
L4V 1H7

Location address

6300 Northam Dr.
MISSISSAUGA, Ontario
L4V 1H7

Company Profile


Integran Technologies is a metallurgical nanotechnology company whose technologies focus upon the engineering of the internal structure of materials on a near-atomic scale to yield 'super materials' which meet the demanding performance requirements of new products. Integran provides its customers materials solutions, and a competitive edge in the marketplace through the manufacture and supply of high performance subcomponents and by licensing. Integran is committed to facilitating and accelerating the technology transfer and implementation process.

Integran’s advanced materials technologies have emerged from over 30 years of collaborative research and development activities conducted with university -, industry - and government research laboratories. Integran continues to maintain strong linkages to these organizations in order to remain at the leading-edge of applied metallurgical research.

Integran is located in a 52,000 sq.ft. facility near Toronto's Lester B. Pearson International Airport. The facility
contains laboratory- pilot - and production scale materials processing, and state of the art materials characterization
capability. Integran’s team of technologists, engineers and scientists provide comprehensive and cost-effective technical support, from initial engineering assessment, through to product qualification and regulatory approval.
Full profile

Full profile

Gino Palumbo
Title:
President - CEO
Area of Responsibility:
Management Executive.
Telephone:
(416) 675-6266
Ext:
226
Facsimile:
(905) 672-4984
Email:
palumbo@integran.com
Klaus Tomantschger
Title:
Vice President
Area of Responsibility:
Management Executive.
Telephone:
(416) 675-6266
Ext:
232
Facsimile:
(905) 672-4984
Email:
klaus@integran.com
Andrew Wang
Title:
Chief Operating Officer
Area of Responsibility:
Manufacturing/Production/Operations.
Telephone:
(416) 675-6266
Ext:
263
Facsimile:
(905) 672-4984
Email:
andrew@integran.com

top of page

Country of Ownership:
Canada  
Year Established:
1999
Exporting:
Yes  
Quality Certification:
AS/EN 9100, ISO 9001.
Primary Industry (NAICS):
541710 - Research and Development in the Physical, Engineering and Life Sciences
Alternate Industries (NAICS):
541330 - Engineering Services
Primary Business Activity:
Services  
Number of Employees:
40 
Product Name:
Nanocrystalline metals/alloys
Integran develops and manufactures nanocrystalline metal/alloy coatings or
electroforms with extreme mechanical and/or magnetic properties
that can be tailored to clients' specifications for manufacturing.

Product Name:
Nanovate NV
Nanovate NV is a hybrid of nanostructured low thermal expansion invar (nickel-iron alloy) on a carbon reinforced composite material. This technology is used for the production of low cost, high durability molds for the manufacture of composite aerospace parts.

Product Name:
Nanovate NS
Nanovate NS is a hybrid material that combines a layer of nanostructure metal (with high strength and hardness) and a substrate of carbon reinforced fiber composite. The resulting material combines a high resistance to fracture and erosion. Low to medium volume production is conducted in Integran's facilities.

Product Name:
Nanovate EP
Integran possesses the core technology to produce hybrids of engineered polymers and ultrahigh strength metal, thus extending the applicability of low cost injection molding to the production of high performance components in aerospace, defence, automotive, biomedical and consumer products. Low to medium volume production is conducted in Integran's facilities while higher volume production (e.g., for consumer electronics) is enabled the technology licensing.

Product Name:
NANOVATE EM
Nanovate EM is a specialized coating with high magnetic permeability that can be used for low to high frequency shielding of low to high field electromagnetic interference. Integran currently supplies custom shielding enclosures for the components of guidance systems such as those used on unmanned aerial vehicles (UAV''s).

Out-License (Offering):
Grain Boundary Engineered Superalloys
Thermomechanical process for Nickel-based superalloys which imparts enhanced resistance to high temperature creep and fatigue performance, thus enabling higher temperature operation of gas turbine engines for enhanced thrust and improved fuel efficiency.

Out-License (Offering):
Nanovate CoP
Nanovate CoP is a cobalt based coating material that offers an environmentally acceptable alternative to hexavalent hard chrome. The technology has been licensed for application to hydraulic bars and is in the process of being qualified for aerospace use. The technology has already successfully passed qualifying testing for engine and landing gear applications. Integran is working with OEMs and the US DoD through its environmental agency (ESTCP) to move the technology to full production. The process technology is covered by MIL-SPEC: MIL-DTL-32502.

top of page

Integran's technologies focus upon engineering the internal structure of materials on a near-atomic scale to yield ‘super materials’
which meet the demanding performance requirements of tomorrow’s products. Integran's advanced materials technologies have
emerged from over 30 years of collaborative research and development activities conducted with university -, industry -
and government research laboratories. Integran continues to maintain strong linkages to these organizations in order to
remain at the leading-edge of applied metallurgical research.

Alliances:

  • Sales/Marketing
  • Technology

Strategic alliances:

Integran undertakes technological and commercial alliances with end users.

top of page

Classification codes

Dun and Bradstreet Number:
259955276 + 0001
JCO Number:
0034078
CAGE Code:
L3573

Total plant size:

Integran has a 52,000 sq ft facility at 6300 Northam Drive, Mississauga, ON

Distribution of employees:

Full Time Staff: Science and Engineering Doctorate Level: 9; Masters Level 6: Bachelors Level: 9; College Diploma: 8; (Amongst full time technical staff 1 is a Fellow of the Canadian Academy of Engineering, 7 are also registered Professional Engineers in the Province of Ontario and 2 are certified Project Management Professionals (PMP)
External Dedicated Technical Consultants: 8 - 7 Doctorate Level including one being a Fellow of the Royal Society of Canada (FRSC); 1 MD with a MASc in Aerospace Engineering.
Technical Disciplines Covered: Materials Science & Engineering; Chemistry & Chemical Engineering; Solid State Physics; Electrical Engineering; Mechanical Engineering; Aerospace Engineering, Biomaterials

Key / Major clients:

Enduro Industries
Pratt & Whitney Canada
Boeing
ONR, Rutgers University
Nuclear Waste Management Organization
Third-Party Information Liability Disclaimer

Some of the information on this Web page has been provided by external sources. The Government of Canada is not responsible for the accuracy, reliability or currency of the information supplied by external sources. Users wishing to rely upon this information should consult directly with the source of the information. Content provided by external sources is not subject to official languages, privacy and accessibility requirements.

Contacts

Contact information

Gino Palumbo
Title:
President - CEO
Area of Responsibility:
Management Executive.
Telephone:
(416) 675-6266
Ext:
226
Facsimile:
(905) 672-4984
Email:
palumbo@integran.com
Klaus Tomantschger
Title:
Vice President
Area of Responsibility:
Management Executive.
Telephone:
(416) 675-6266
Ext:
232
Facsimile:
(905) 672-4984
Email:
klaus@integran.com
Andrew Wang
Title:
Chief Operating Officer
Area of Responsibility:
Manufacturing/Production/Operations.
Telephone:
(416) 675-6266
Ext:
263
Facsimile:
(905) 672-4984
Email:
andrew@integran.com
Description

Company description

Country of Ownership:
Canada  
Year Established:
1999
Exporting:
Yes  
Quality Certification:
AS/EN 9100, ISO 9001.
Primary Industry (NAICS):
541710 - Research and Development in the Physical, Engineering and Life Sciences
Alternate Industries (NAICS):
541330 - Engineering Services
Primary Business Activity:
Services  
Number of Employees:
40 
Products, services and licensing

Product / Service / Licensing

Product Name:
Nanocrystalline metals/alloys
Integran develops and manufactures nanocrystalline metal/alloy coatings or
electroforms with extreme mechanical and/or magnetic properties
that can be tailored to clients' specifications for manufacturing.

Product Name:
Nanovate NV
Nanovate NV is a hybrid of nanostructured low thermal expansion invar (nickel-iron alloy) on a carbon reinforced composite material. This technology is used for the production of low cost, high durability molds for the manufacture of composite aerospace parts.

Product Name:
Nanovate NS
Nanovate NS is a hybrid material that combines a layer of nanostructure metal (with high strength and hardness) and a substrate of carbon reinforced fiber composite. The resulting material combines a high resistance to fracture and erosion. Low to medium volume production is conducted in Integran's facilities.

Product Name:
Nanovate EP
Integran possesses the core technology to produce hybrids of engineered polymers and ultrahigh strength metal, thus extending the applicability of low cost injection molding to the production of high performance components in aerospace, defence, automotive, biomedical and consumer products. Low to medium volume production is conducted in Integran's facilities while higher volume production (e.g., for consumer electronics) is enabled the technology licensing.

Product Name:
NANOVATE EM
Nanovate EM is a specialized coating with high magnetic permeability that can be used for low to high frequency shielding of low to high field electromagnetic interference. Integran currently supplies custom shielding enclosures for the components of guidance systems such as those used on unmanned aerial vehicles (UAV''s).

Out-License (Offering):
Grain Boundary Engineered Superalloys
Thermomechanical process for Nickel-based superalloys which imparts enhanced resistance to high temperature creep and fatigue performance, thus enabling higher temperature operation of gas turbine engines for enhanced thrust and improved fuel efficiency.

Out-License (Offering):
Nanovate CoP
Nanovate CoP is a cobalt based coating material that offers an environmentally acceptable alternative to hexavalent hard chrome. The technology has been licensed for application to hydraulic bars and is in the process of being qualified for aerospace use. The technology has already successfully passed qualifying testing for engine and landing gear applications. Integran is working with OEMs and the US DoD through its environmental agency (ESTCP) to move the technology to full production. The process technology is covered by MIL-SPEC: MIL-DTL-32502.

Technology

Technology profile

Integran's technologies focus upon engineering the internal structure of materials on a near-atomic scale to yield ‘super materials’
which meet the demanding performance requirements of tomorrow’s products. Integran's advanced materials technologies have
emerged from over 30 years of collaborative research and development activities conducted with university -, industry -
and government research laboratories. Integran continues to maintain strong linkages to these organizations in order to
remain at the leading-edge of applied metallurgical research.
Market

Market profile

Alliances:

  • Sales/Marketing
  • Technology

Strategic alliances:

Integran undertakes technological and commercial alliances with end users.
Sector

Sector information

Classification codes

Dun and Bradstreet Number:
259955276 + 0001
JCO Number:
0034078
CAGE Code:
L3573

Total plant size:

Integran has a 52,000 sq ft facility at 6300 Northam Drive, Mississauga, ON

Distribution of employees:

Full Time Staff: Science and Engineering Doctorate Level: 9; Masters Level 6: Bachelors Level: 9; College Diploma: 8; (Amongst full time technical staff 1 is a Fellow of the Canadian Academy of Engineering, 7 are also registered Professional Engineers in the Province of Ontario and 2 are certified Project Management Professionals (PMP)
External Dedicated Technical Consultants: 8 - 7 Doctorate Level including one being a Fellow of the Royal Society of Canada (FRSC); 1 MD with a MASc in Aerospace Engineering.
Technical Disciplines Covered: Materials Science & Engineering; Chemistry & Chemical Engineering; Solid State Physics; Electrical Engineering; Mechanical Engineering; Aerospace Engineering, Biomaterials

Key / Major clients:

Enduro Industries
Pratt & Whitney Canada
Boeing
ONR, Rutgers University
Nuclear Waste Management Organization
Last Update Date 2016-01-14
Date Modified: