Complete profile


Dovre Canada Limited

Third-Party Information Liability Disclaimer

Some of the information on this Web page has been provided by external sources. The Government of Canada is not responsible for the accuracy, reliability or currency of the information supplied by external sources. Users wishing to rely upon this information should consult directly with the source of the information. Content provided by external sources is not subject to official languages, privacy and accessibility requirements.


  • Legal/Operating Name:
    Dovre Canada Limited
http://dovregroup.com/
nadine.martin@dovregroup.com
Mailing/Location Address:
5 Hill O'Chips
ST. JOHN'S, Newfoundland and Labrador
A1C 0A8
Tel.:
(709) 754-2145
Tel.:
(877) 754-2145
FAX:
(709) 754-2412

Dovre Canada Limited specializes in: project management consultants; mechanical completion and commissioning software; commissioning/startup; process simulation; dynamic modeling, and problem solving process control systems; and completion technology. The company has over 20 years experience in major projects in the North Sea and 10 years experience in Canada on the Hibernia, Terra Nova and Sable offshore projects.



Full profile

Contact information

 
Jerome Peddle
  Title:   Chief Financial Officer
  Area of Responsibility:   Finance/Accounting
  Telephone:   (709) 745-2145
  Facsimile:   (709) 754-2412
  Email:   fabcon.canada@fabcon.nf.ca
 
 
Ron Edmunds
  Title:   Vice President
  Telephone:   (709) 754-2145
  Facsimile:   (709) 754-2412
  Email:   ron.edmunds@dovregroup.com
 
top of page

Company description

Country of Ownership: Canada  
Exporting: Yes  
Primary Industry (NAICS): 541619 - Other Management Consulting Services
Alternate Industries (NAICS): 236110 - Residential Building Construction
236210 - Industrial Building and Structure Construction
236220 - Commercial and Institutional Building Construction
541330 - Engineering Services
541510 - Computer Systems Design and Related Services
541611 - Administrative Management and General Management Consulting Services
Primary Business Activity: Manufacturer / Processor / Producer  

Product / Service / Licensing

 
Product Name: Quality Assurance/Quality Control
 
 
Product Name: Operator Training Simulator for Oil and Gas Projects
 
Fabcon Canada’s Operator Training Simulator (OTS) provides a key
tool to ensure offshore competency is maintained. Our OTS
conforms to established methods of training and competency
assurance as recognized by the Canadian-Newfoundland Offshore
Petroleum Board (C-NOPB).

 
Service Name: Personnel Services
 
Specialist & Multi-discipline Personnel:
FCL can provide highly qualified personnel for project
assignments within all disciplines - including senior and
supervisory personnel. We specialize in providing leadership
and guidance during project transition.


 
Service Name: Project Management
 
To assist with the challenges related to the successful
evaluation, execution and completion of capital investment
projects, we can provide professional management services,
including:
Project organization & management
Planning & scheduling
Cost estimation & control
Contract & commercial services
Risk management
Mechanical completion
Commissioning & start-up
Construction management

 
top of page

Technology profile

Proprietary D-SPICE software - dynamic simulation of process,
instrumentation and control engineering. D-SPICE has proven to
be a highly advanced, multi-faceted dynamic modeling system that
has been successfully used in many projects worldwide. Large-
scale models can be easily constructed and tested, and its
flexible approach offers the model’s user a cost-effective
solution to building and maintaining a state of the art training
tool. D-SPICE is a modular, multi-compositional dynamic
simulation tool capable of simulating a wide range of process
and plant systems. Typical applications include engineering
studies, operational analysis, plant start-ups and real time
systems. Modules available include pipes, valves, separators,
heat exchangers, controllers, compressors and pumps.

Market profile

Industry sector market interests:

  • Mining/Petroleum/Gas

Geographic markets:

Export experience:
  • Texas
top of page

Sector information

Key / Major clients:

Hibernia Management and Development Co. (HMDC),
Terra Nova Alliance (TNA), Sable Offshore Energy
Project (SOEP)

Success stories:

Terra Nova operator training simulator (OTS) was
a huge success, with only 6 weeks from arrival of
DCS configurations to the start of operator
training. The OTS has allowed for continuous
training of offshore operators since Oct
1999, and has been used extensively during
startup to test and verify procedures.

Third-Party Information Liability Disclaimer

Some of the information on this Web page has been provided by external sources. The Government of Canada is not responsible for the accuracy, reliability or currency of the information supplied by external sources. Users wishing to rely upon this information should consult directly with the source of the information. Content provided by external sources is not subject to official languages, privacy and accessibility requirements.


Contact information

 
Jerome Peddle
  Title:   Chief Financial Officer
  Area of Responsibility:   Finance/Accounting
  Telephone:   (709) 745-2145
  Facsimile:   (709) 754-2412
  Email:   fabcon.canada@fabcon.nf.ca
 
 
Ron Edmunds
  Title:   Vice President
  Telephone:   (709) 754-2145
  Facsimile:   (709) 754-2412
  Email:   ron.edmunds@dovregroup.com
 

Company description

Country of Ownership: Canada  
Exporting: Yes  
Primary Industry (NAICS): 541619 - Other Management Consulting Services
Alternate Industries (NAICS): 236110 - Residential Building Construction
236210 - Industrial Building and Structure Construction
236220 - Commercial and Institutional Building Construction
541330 - Engineering Services
541510 - Computer Systems Design and Related Services
541611 - Administrative Management and General Management Consulting Services
Primary Business Activity: Manufacturer / Processor / Producer  

Product / Service / Licensing

 
Product Name: Quality Assurance/Quality Control
 
 
Product Name: Operator Training Simulator for Oil and Gas Projects
 
Fabcon Canada’s Operator Training Simulator (OTS) provides a key
tool to ensure offshore competency is maintained. Our OTS
conforms to established methods of training and competency
assurance as recognized by the Canadian-Newfoundland Offshore
Petroleum Board (C-NOPB).

 
Service Name: Personnel Services
 
Specialist & Multi-discipline Personnel:
FCL can provide highly qualified personnel for project
assignments within all disciplines - including senior and
supervisory personnel. We specialize in providing leadership
and guidance during project transition.


 
Service Name: Project Management
 
To assist with the challenges related to the successful
evaluation, execution and completion of capital investment
projects, we can provide professional management services,
including:
Project organization & management
Planning & scheduling
Cost estimation & control
Contract & commercial services
Risk management
Mechanical completion
Commissioning & start-up
Construction management

 

Technology profile

Proprietary D-SPICE software - dynamic simulation of process,
instrumentation and control engineering. D-SPICE has proven to
be a highly advanced, multi-faceted dynamic modeling system that
has been successfully used in many projects worldwide. Large-
scale models can be easily constructed and tested, and its
flexible approach offers the model’s user a cost-effective
solution to building and maintaining a state of the art training
tool. D-SPICE is a modular, multi-compositional dynamic
simulation tool capable of simulating a wide range of process
and plant systems. Typical applications include engineering
studies, operational analysis, plant start-ups and real time
systems. Modules available include pipes, valves, separators,
heat exchangers, controllers, compressors and pumps.

Market profile

Industry sector market interests:

  • Mining/Petroleum/Gas

Geographic markets:

Export experience:
  • Texas

Sector information

Key / Major clients:

Hibernia Management and Development Co. (HMDC),
Terra Nova Alliance (TNA), Sable Offshore Energy
Project (SOEP)

Success stories:

Terra Nova operator training simulator (OTS) was
a huge success, with only 6 weeks from arrival of
DCS configurations to the start of operator
training. The OTS has allowed for continuous
training of offshore operators since Oct
1999, and has been used extensively during
startup to test and verify procedures.