Complete profile


Third-Party Information Liability Disclaimer

Some of the information on this Web page has been provided by external sources. The Government of Canada is not responsible for the accuracy, reliability or currency of the information supplied by external sources. Users wishing to rely upon this information should consult directly with the source of the information. Content provided by external sources is not subject to official languages, privacy and accessibility requirements.




Last Updated: 2014-03-21

Enervac Corporation

Company information

Logo  
 
Legal Name:   Enervac Corporation
Operating Name:   Enervac Corporation
 
Mailing Address
280 Holiday Inn Dr.
CAMBRIDGE, Ontario
N3C 1Z4
Location Address
280 Holiday Inn Dr.
CAMBRIDGE, Ontario
N3C 1Z4
 
Telephone: (519) 651-1034
Toll Free Phone: 1-800-923-2999
Fax: (519) 651-1038
Email: sales@enervac.com
Website URL: http://www.enervac.com 
 
Top

Contact information

 
Anthony Guglielmi
  Title:   President
  Area of Responsibility:   Management Executive Finance/Accounting Manufacturing/Production/Operations
  Telephone:   (519) 651-1034
  Ext:   226
  Fax:   (519) 651-1038
  Email:   anthonyg@enervac.com
 
 
Y.B. Mehta
  Title:   Engineer
  Area of Responsibility:   Research/Development/Engineering
  Telephone:   (519) 651-1034
  Ext:   236
  Fax:   (519) 561-1038
  Email:   ybmehta@enervac.com
 
 
Scott Allen
  Title:   Vice President
  Area of Responsibility:   Domestic Sales & Marketing Export Sales & Marketing Management Executive Research/Development/Engineering
  Telephone:   (519) 651-1034
  Ext:   232
  Fax:   (519) 651-1038
  Email:   sales@enervac.com
 

Top

Company description

 
Our Company History

Bowser Inc. of Fort Wayne, Indiana was started by S.F. Bowser in
1885 to manufacture and market a self-measuring coal oil
dispenser of his own design. Evolution of this idea spread to
the measurement and handling of many commercial liquids of the
time. To keep pace with the demand for his equipment, Bowser
opened branches around the world.

Bowser continued to produce and sell its products until World
War II, then went entirely into war production. In the post war
period, Bowser was internationally known and pioneered the use
of vacuum to the degasification and dehydration of insulating oil
for the electrical industry and power authorities. In 1969,
New York based Keene Corporation purchased Bowser Inc. and
continued the manufacture of vacuum purification equipment
as well as expanding to gas processing equipment.

In 1978, Keene Corporation dropped the engineered product line.
Soon after, ENERVAC Corporation formed to continue to service
customers who required specialized fluid handling equipment.
With enhanced engineering, manufacturing and test facilities,
the product line continued to expand and diversify. In 1992,
ENERVAC Corporation acquired 4-R Technologies Inc. and gained
access to new markets requiring fluid waste minimization and
resource recovery systems. With representatives across North
America, ENERVAC Corporation's reputation for quality,
performance and innovation is unmatched by the competition.

Cost recovery. Resource recovery. Two important aspects in
today's business environment and in the concerns of the
communities we live in and invest in. At ENERVAC, we are proud
to be associated with the companies who are committed to
environmental responsibility. We are proud to be a part of this
effort, developing technologies and systems to manage waste
effectively and improve the profitability of our customers.

Our Divisions

ENERVAC is divided into two divisions, our Environmental
Technology Group and our Utility Group to better service our
wide range of customers.

The Environmental Technology Group manages the Trampoil
Separators, Coolant Recycling Systems, Sump Cleaners, Reverse
Osmosis Systems, Ultrafiltration Systems, Filters as well as
Consulting on water, coolant and waste water issues.

The Utility Group manages Dehydrators, Degasifiers, Dryers,
Mobile Oil Filters, Fuller's Earth Systems, Sulfur Hexafluoride
(SF6) Processing Systems, Oil Filters and Air Filters,
Centralized Lubrication Systems as well as consulting on your
oil, air and SF6 needs.

Environmental Profile

Enervac specializes in dehydration and conventional filtration technologies for oil purification and recycling. Enervac's compressed air dryer group specialize in high pressure dryers for moisture and particulate removal. The Environmental Technology Group have expertise in oil/water/solid separation technologies and in membrane separation (reverse osmosis, nanofiltration, ultrafiltration and microfiltration) to purify, concentrate or recycle water, cleaners and wastewater.


The quality assurance programs meet high standards, including ISO 9000:2000 and ASME pressure vessel code. Customer support is provided by technical sales, the applications group, the service department and the in-house testing lab. Key Words: SF6, SF6 recovery, oil, vacuum oil dehydration, vacuum oil degasification, coolant recovery, filtration, waste water treatment, reclamation, fullers earth, vacuum oil purifiers, trampoil separators, lubrication.  
Country of Ownership: Canada  
Year Established: 1978
Exporting: Yes  
Quality Certification: ISO 9001
Primary Industry (NAICS): 333310 - Commercial and Service Industry Machinery Manufacturing
Alternate Industries (NAICS): 333130 - Mining and Oil and Gas Field Machinery Manufacturing
333299 - All Other Industrial Machinery Manufacturing
333990 - All Other General-Purpose Machinery Manufacturing
334512 - Measuring, Medical and Controlling Devices Manufacturing
Primary Business Activity: Manufacturer / Processor / Producer  
Total Sales ($CDN): $10,000,000 to $24,999,999 
Export Sales ($CDN): $5,000,000 to $9,999,999 
Number of Employees: 40 

Top

Product / Service / Licensing

 
Product Name: 'B.W.T.' Batch Waste Treatment System.
 
Disposal of liquid wastes such as oily water, floor cleaner and/or parts cleaner is costly and results in an unwanted environmental liability. As well, since these wastes are often 95% water, disposal results in a waste of water resources.

Enervac's B.W.T. (Batch Waste Treatment System) is a cost-effective means of dealing with high water content liquid wastes. The benefits of an Enervac B.W.T. are: dramatically reduces haul away disposal costs; safe, simple, single step chemical additive process; removes suspended solids, emulsified oils and heavy metals quickly and efficiently; treated water and wastes within code limits for sewer discharge and landfill.

By adding the advanced encapsulating chemistry of Benfloc with a high speed mixer, a batch of liquid waste can be cleaned, filtered and sewerable in a cycle which takes 20 minutes. Enervac provides design recommendations, equipment startup and after sales services.

 
Product Name: "Centra" Central Coolant Management System.
 
Enervac's "Centra" Central Coolant Management System allows you to recycle and reuse your coolants saving the substantial costs of new coolant replacement and continuously spiralling cost of disposal. Also, "Centra" reduces your environmental liability and improves your health and safety record by maintaining a high quality supply of coolant. Tool life is also improved. Enervac provides design recommendations, equipment startup and after sales services.

 
Product Name: AIR & GAS DRYERS AND FILTERS
 
Enervac dryers and filters are designed for removal of moisture
from process air and gases, eliminating condensation and freeze-
up, moisture corrosion, protecting pneumatic instruments and
extending the life of pneumatic tools.

 
Product Name: DEHYDRATOR/ANHYDRATOR INDUSTRIAL, NES
 
Enervac's Vacuum Oil Dehydrator is a completely packaged unit
mounted on a common base, fully assembled and ready for
connection to utilities.
The system uses a vacuum process to remove water, light
hydrocarbons and solid contaminants. It has been performing
services for the past 25 years in many applications such as:
Lubricating Oils, Hydraulic Oils, Turbine Oils, Compressor Seal
Oils, Synthetic Fluids, Insulating Oils, Cutting and Cooling
Mineral Oils, and quenching oils.

 
Product Name: E859A dehydration system.
 
Enervac has a full range of turnkey dehydrators that remove water, light ends, and particulates from various industrial oils, thus eliminating the need for disposal. The system includes an inlet strainer, oil heater, vacuum chamber and large evaporation surface area, vacuum source, condenser, discharge pump and after filter. The benefits to the customer include reduced environmental liability, reduced disposal cost of oil, reduced purchase cost of new oil, longer-bearing life, reduced downtime, and trouble free operation of the hydraulic system. Enervac provides design, recommendations, start-up service and after-sales service.

 
Product Name: Environmental Products and Services
 
 
Product Name: FILTER CARTRIDGE, INDUSTRIAL
 
Industrial filtration equipment utilizing pleated paper and other
media to provide the exact degree of filtration and flow rate for
virtually any application.

 
Product Name: FILTERING MACHINERY, INDUSTRIAL, NES
 
 
Product Name: FULLER'S EARTH FILTRATION
 
Fuller's Earth oil filters are used for removal of acids and
soluable surface acting contaminants by adsorption. They are
typically used for transformer oil up-grading and reclamation.
Treatment with Fuller's Earth will increase Interfacial Tension
of oil and reduce Power Factor to desired levels. All acids,
gums, resins, and other surface acting soluable contaminants are
trapped and held within the media.

 
Product Name: LUBRICATION SYSTEM, GRAVITY FEED TYPE
 
Oil circulating lubrication systems including pumps, tanks,
filters, coolers, indicators and other accessory equipment in
either packaged or component systems are available.

 
Product Name: OIL/PETROLEUM REFINING MACHY/EQUIP, NES
 
 
Product Name: PCB destruction units, transformer oil regeneration plants, SF6 Gas cylinders
 
 
Product Name: RECYCLING EQUIPMENT, NES
 
 
Product Name: SEPARATOR/TRAP, OIL & GAS, OIL FIELD PROD
 
 
Product Name: SF6 GAS SERVICING CART
 
The Enervac SF6 Gas Servicing Cart is designed for the
processing of SF6 (Sulfur Hexafluoride) Gas used in High Voltage
Metal Clad Switch Gear, Bus Ducts, Accelerators, Circuit Breakers
and transformers that are charged during normal operation with
SF6 Gas as a dielectric. The cart will perform the following
functions:
- Removal of SF6 Gas from the serviced equipment, liquification
and storage of gas into system storage tank.
- System evacuation for dry-out prior to re-charging.
- Re-evaporating SF6 Gas and re-filling evacuated equipment.
- Purification of SF6 Gas by absorption and removal of
decomposition proucts and moisture.

 
Product Name: SF6 servicing carts.
 
Enervac has a full range of SF6 servicing carts, trailer-mounted for large volumes or compact and portable for small volumes. These servicing carts will remove the gas from the circuit breaker, purify it to remove water, particulate and degradation products, store it in liquid form while repairs are made, and fill the breaker with clean gas. The benefits to the customer are savings of costly SF6 gas, as the gas is not being discharged into the atmosphere. This also reduces the potential depletion of the ozone layer. Enervac provides design, recommendations, equipment start-up services and after sales services.

 
Product Name: Tramp oil separator.
 
Enervac Environmental Group provides turnkey oil/water/solid separators to remove free oil content of wastewater to below 15 ppm prior to discharging the effluent to sanitary sewers. The system includes a floating skimmer, supply pump, pre-filter, coalescer-based oil/water separator medium, hoses and automatic system shut-down devices.
The benefits to the customer are environmental compliance and reduced disposal costs. Enervac offers system design and specifications, recommendations for installation, start-up services and after sales services.

 
Product Name: VACUUM OIL DEGASIFIER
 
Enervac's Vacuum Oil Degasifiers are for upgrading of new and
used electrical insulating liquids, transformer oil, polybutenes
and silicones. They remove free and soluable water, free and
dissolved air and gases, and particulate matter. Mobile and
Stationary units in sizes to fit every need.

 
Service Name: Oil and Gas, Products, Equipment, Service, & Supplies
 
 

Top

Market profile

Alliances:

  • Sales/Marketing
  • Technology

Industry sector market interests:

  • Consumer Products
  • Environment
  • Manufacturing
  • Medical/Biotechnology/Chemical
  • Mining/Petroleum/Gas
  • Service Industry

Geographic markets:

Export experience:
  • Australia
  • Japan
  • Korea, Republic of
  • New Zealand
  • United States
  • Alabama
  • Arkansas
  • California
  • Connecticut
  • Delaware
  • Florida
  • Georgia
  • Illinois
  • Indiana
  • Iowa
  • Kansas
  • Louisiana
  • Maine
  • Maryland
  • Massachusetts
  • Michigan
  • Minnesota
  • Mississippi
  • New Hampshire
  • New Jersey
  • New York
  • North Carolina
  • North Dakota
  • Ohio
  • Oklahoma
  • Oregon
  • Pennsylvania
  • Rhode Island
  • South Carolina
  • Tennessee
  • Texas
  • Vermont
  • Virginia
  • Washington
  • Wisconsin
Actively pursuing:
  • United Kingdom
  • Alaska
  • Arizona
  • Colorado
  • District of Columbia
  • Hawaii
  • Idaho
  • Kentucky
  • Missouri
  • Montana
  • Nebraska
  • Nevada
  • New Mexico
  • South Dakota
  • Utah
  • West Virginia
  • Wyoming

Top

Sector information

Classification codes

Dun and Bradstreet Number:
240602912 +
CAGE Code:
L0935

Total plant size:

60,000 sq.ft.

Distribution of employees

40

Key / Major clients:

Siemens, ABB, AREVA, Alstom, Duke Energy, TVA, CG International, Hydro One, BC Hydro, Major Utilities, Armed Forces, Mining, Steel
Plants, Pulp & Paper Mills, Governments

Success stories:

Currently operating joint ventures in U.A.E. and
Brazil. We are ISO 9001 : 2008 registered and
certified.
Top



Note: This document is presented in the language provided by the author/source. Most of the information contained in Canadian Company Capabilities (CCC) has been provided by sources external to Industry Canada. The accuracy, currency and reliability of the information contained in CCC are the sole responsibility of the registered companies and related organizations. Industry Canada assumes no responsibility in this respect. The registered businesses shall ensure the continued monitoring of the information contained in CCC and ask that it be modified when necessary.