Complete profile


S-FRAME Software Inc.

Third-Party Information Liability Disclaimer

Some of the information on this Web page has been provided by external sources. The Government of Canada is not responsible for the accuracy, reliability or currency of the information supplied by external sources. Users wishing to rely upon this information should consult directly with the source of the information. Content provided by external sources is not subject to official languages, privacy and accessibility requirements.


  • Legal/Operating Name:
    S-FRAME Software Inc.
http://www.s-frame.com
sales@s-frame.com
Mailing/Location Address:
1158-13351 Commerce Pky
RICHMOND, British Columbia
V6V 2X7
Tel.:
(604) 273-7737
FAX:
(604) 273-7731
Logo

Develop s/w for structural and mechanical engineering consultants. ConnectIT-1997



Full profile

Contact information

 
Joshna MacGregor
  Title:   Administrator
  Area of Responsibility:   Administrative Services
  Telephone:   (604) 273-7737
  Facsimile:   (604) 273-7731
  Email:   joshnam@s-frame.com
 
 
Marinos Stylianou
  Title:   Chief Executive Officer
  Area of Responsibility:   Management Executive
  Telephone:   (203) 421-4800
  Email:   marinoss@s-frame.com
 
 
George Casoli
  Title:   President
  Area of Responsibility:   Management Executive
  Telephone:   (604) 273-7737
  Facsimile:   (604) 273-7731
  Email:   georgec@s-frame.com
 
top of page

Company description

Country of Ownership: Canada  
Year Established: 1981
Exporting: Yes  
Primary Industry (NAICS): 541510 - Computer Systems Design and Related Services
Primary Business Activity: Manufacturer / Processor / Producer  

Product / Service / Licensing

 
Product Name: S-FRAME for Windows
 
2D or 3D Structural Analysis Software. Unique 2D/3D switch: P-
FRAME Analysis package is built into 3D S-FRAME. Supports
membranes, quadrilateral/triangular plates, shells, non-
sequential joint numbering. Automatic generation of trussess,
multi-storey frames, arches, circles and spirals. Translate,
Rotate, Scale and Reflect Editing Features, Graphical Section
Editor, Two-way DXF Interchange, Undo/Redo, Moving Loads, P-
delta, Non-linear Newton Raphson Iterative Solver with
Incremental Loading (Tension/compression only, cable, hook and
gap elements), Buckling, Stressed/Unstressed Vibration, Seismic
Analysis, Dynamic Analysis, Segmental Force Envelopes, Influence
Lines. Wind load generator in accordance with API Specification 4F:2008
ConnectIT Category Description: CAD/CAM Engineering

ConnectIT-keywords: Structural Analysis, Frame Analysis, Finite
Element Analysis and Design, CAE, FEA

 
Product Name: P-FRAME for Windows
 
2D Structural Analysis Software. Translate, Rotate, Scale, and
Reflect Editing Features, Graphical Section Editor, Two-way DXF
Interchange, Undo/Redo, Moving Loads, P-delta, Non-linear Newton
Raphson Iterative Solver with Incremental Loading
(tension/compression only, cable, hook and gap elements),
Buckling, Stressed/Unstressed Vibration, Seismic Analysis,
Dynamic Analysis, Segmental Force Envelopes, Influence Lines
ConnectIT Category Description: CAD/CAM Engineering

ConnectIT-keywords: Structural Analysis, Frame Analysis, Finite
Element Analysis and Design, CAE, FEA

 
Product Name: S-STEEL for Windows
 
3D Steel Design Program to complement S-FRAME or P-FRAME for
Windows. Fully integrated, iterative design and analysis
process. Code Checks or automatic redesign options for all or
select part of structure. Member grouping for rationalised
designs. Scratch pad for design refinement. Lists of Admissible
Sections, Quantily Takeoff, Structure Costing. Supports American
ASD-89, LRFD-94, Canadian S16.1-M94, New Zealand NZ 3404,
Australian AS 4100, European EC3, and British BS 5950 Codes.
Generates Reports on Material Takeoff, Total Weight, Cost,
Surface Area. Full representation of Results.
ConnectIT Category Description: CAD/CAM Construction

ConnectIT-keywords: Structural Analysis, Steel Design, Frame
Analysis, Finite Element Analysis, CAE, FEA

 
Product Name: S-CONCRETE
 
• Rectangular and circular sections.
• Axial load and moment interaction diagrams.
• Shear design and biaxial bending.
• T, L and rectangular beams.
• Flexure, shear and torsion designs.
• Bar spacing and stirrup spacing checks.
• Crack control and steel area checks.
• Iterative and automated design.
• Visual editor (click/drag to make changes).
• ACI 318-89, 95 & 99.
• CSA-A23.3-94.
• BS 8110:1985 & 1997.
• International range of reinforcing bars.
• Export detailed drawings to AutoCAD™.
• Shear wall design and detailing.
• Seismic design and detailing.
• C, H, T, L, rectangular or I shapes.
• Axial load, flexure, shear and torsion design.
• Axial load and moment interaction diagrams.
• Empirical design method (ACI, UBC, CSA).
• Export detailed drawings to AutoCAD™.
Earthquake resistant design, Uniform Building Code (Seismic Zone 3 & 4):
• Boundary element size and detailing evaluation.
• Simplified or strain analysis method.
• Concrete confinement (Zone ties and configuration).
• Curtains of reinforcing, steel area and steel ratios.
• Anchorage conditions (i.e. hooks).
• Bar spacing requirements.
CSA – A23.3 (R=1.0, 1.5, 2.0 or 3.5):
• Ductility/stability requirements.
• Curtains of reinforcing, steel area and steel ratios.
• Anchorage and development length including hooks.
• Simplified or general method of shear design.
• Concrete confinement (Zone ties and configuration).
• Sliding shear design.
• Bar spacing requirements.


 
Product Name: B-LINE
 
• Superb interactive visual editor.
• T-beams, L-beams, slab bands and rectangular beams.
• Rectangular and circular columns as well as girder supports.
• Standard and user defined reinforcing styles are available.
• Automatic generation of pattern loading and load combinations.
• Automatic design with beam section and/or reinforcement optimization.
• Design to ACI 318-99 & 95, CSA-A23.3-94 and BS 8110:1997 & 1985.
• Moment redistribution.
• Combined moment, shear and torsion design for all codes.
• Short term and long term (cracked section) deflection evaluation.
• Full graphical output including capacity envelopes on shear moment and torsion diagrams.
• Quality output to AutoCAD™ and Microsoft Word™.
• Fully integrated with TEDDS.

 
top of page

Third-Party Information Liability Disclaimer

Some of the information on this Web page has been provided by external sources. The Government of Canada is not responsible for the accuracy, reliability or currency of the information supplied by external sources. Users wishing to rely upon this information should consult directly with the source of the information. Content provided by external sources is not subject to official languages, privacy and accessibility requirements.


Contact information

 
Joshna MacGregor
  Title:   Administrator
  Area of Responsibility:   Administrative Services
  Telephone:   (604) 273-7737
  Facsimile:   (604) 273-7731
  Email:   joshnam@s-frame.com
 
 
Marinos Stylianou
  Title:   Chief Executive Officer
  Area of Responsibility:   Management Executive
  Telephone:   (203) 421-4800
  Email:   marinoss@s-frame.com
 
 
George Casoli
  Title:   President
  Area of Responsibility:   Management Executive
  Telephone:   (604) 273-7737
  Facsimile:   (604) 273-7731
  Email:   georgec@s-frame.com
 

Company description

Country of Ownership: Canada  
Year Established: 1981
Exporting: Yes  
Primary Industry (NAICS): 541510 - Computer Systems Design and Related Services
Primary Business Activity: Manufacturer / Processor / Producer  

Product / Service / Licensing

 
Product Name: S-FRAME for Windows
 
2D or 3D Structural Analysis Software. Unique 2D/3D switch: P-
FRAME Analysis package is built into 3D S-FRAME. Supports
membranes, quadrilateral/triangular plates, shells, non-
sequential joint numbering. Automatic generation of trussess,
multi-storey frames, arches, circles and spirals. Translate,
Rotate, Scale and Reflect Editing Features, Graphical Section
Editor, Two-way DXF Interchange, Undo/Redo, Moving Loads, P-
delta, Non-linear Newton Raphson Iterative Solver with
Incremental Loading (Tension/compression only, cable, hook and
gap elements), Buckling, Stressed/Unstressed Vibration, Seismic
Analysis, Dynamic Analysis, Segmental Force Envelopes, Influence
Lines. Wind load generator in accordance with API Specification 4F:2008
ConnectIT Category Description: CAD/CAM Engineering

ConnectIT-keywords: Structural Analysis, Frame Analysis, Finite
Element Analysis and Design, CAE, FEA

 
Product Name: P-FRAME for Windows
 
2D Structural Analysis Software. Translate, Rotate, Scale, and
Reflect Editing Features, Graphical Section Editor, Two-way DXF
Interchange, Undo/Redo, Moving Loads, P-delta, Non-linear Newton
Raphson Iterative Solver with Incremental Loading
(tension/compression only, cable, hook and gap elements),
Buckling, Stressed/Unstressed Vibration, Seismic Analysis,
Dynamic Analysis, Segmental Force Envelopes, Influence Lines
ConnectIT Category Description: CAD/CAM Engineering

ConnectIT-keywords: Structural Analysis, Frame Analysis, Finite
Element Analysis and Design, CAE, FEA

 
Product Name: S-STEEL for Windows
 
3D Steel Design Program to complement S-FRAME or P-FRAME for
Windows. Fully integrated, iterative design and analysis
process. Code Checks or automatic redesign options for all or
select part of structure. Member grouping for rationalised
designs. Scratch pad for design refinement. Lists of Admissible
Sections, Quantily Takeoff, Structure Costing. Supports American
ASD-89, LRFD-94, Canadian S16.1-M94, New Zealand NZ 3404,
Australian AS 4100, European EC3, and British BS 5950 Codes.
Generates Reports on Material Takeoff, Total Weight, Cost,
Surface Area. Full representation of Results.
ConnectIT Category Description: CAD/CAM Construction

ConnectIT-keywords: Structural Analysis, Steel Design, Frame
Analysis, Finite Element Analysis, CAE, FEA

 
Product Name: S-CONCRETE
 
• Rectangular and circular sections.
• Axial load and moment interaction diagrams.
• Shear design and biaxial bending.
• T, L and rectangular beams.
• Flexure, shear and torsion designs.
• Bar spacing and stirrup spacing checks.
• Crack control and steel area checks.
• Iterative and automated design.
• Visual editor (click/drag to make changes).
• ACI 318-89, 95 & 99.
• CSA-A23.3-94.
• BS 8110:1985 & 1997.
• International range of reinforcing bars.
• Export detailed drawings to AutoCAD™.
• Shear wall design and detailing.
• Seismic design and detailing.
• C, H, T, L, rectangular or I shapes.
• Axial load, flexure, shear and torsion design.
• Axial load and moment interaction diagrams.
• Empirical design method (ACI, UBC, CSA).
• Export detailed drawings to AutoCAD™.
Earthquake resistant design, Uniform Building Code (Seismic Zone 3 & 4):
• Boundary element size and detailing evaluation.
• Simplified or strain analysis method.
• Concrete confinement (Zone ties and configuration).
• Curtains of reinforcing, steel area and steel ratios.
• Anchorage conditions (i.e. hooks).
• Bar spacing requirements.
CSA – A23.3 (R=1.0, 1.5, 2.0 or 3.5):
• Ductility/stability requirements.
• Curtains of reinforcing, steel area and steel ratios.
• Anchorage and development length including hooks.
• Simplified or general method of shear design.
• Concrete confinement (Zone ties and configuration).
• Sliding shear design.
• Bar spacing requirements.


 
Product Name: B-LINE
 
• Superb interactive visual editor.
• T-beams, L-beams, slab bands and rectangular beams.
• Rectangular and circular columns as well as girder supports.
• Standard and user defined reinforcing styles are available.
• Automatic generation of pattern loading and load combinations.
• Automatic design with beam section and/or reinforcement optimization.
• Design to ACI 318-99 & 95, CSA-A23.3-94 and BS 8110:1997 & 1985.
• Moment redistribution.
• Combined moment, shear and torsion design for all codes.
• Short term and long term (cracked section) deflection evaluation.
• Full graphical output including capacity envelopes on shear moment and torsion diagrams.
• Quality output to AutoCAD™ and Microsoft Word™.
• Fully integrated with TEDDS.