Last Updated: 2013-02-21

Hatch Mott MacDonald

Company information

Legal Name:   Hatch Mott MacDonald
Operating Name:   Hatch Mott MacDonald
Mailing Address 300-15 Allstate Pky MARKHAM, Ontario L3R 5B4	Location Address 300-15 Allstate Pky MARKHAM, Ontario L3R 5B4
Telephone: (905) 943-9600
Toll Free Phone: 1-800-678-6578
Fax: (905) 940-5848
Email: paul.marsh@hatchmott.com
Website URL: http://www.hatchmott.com

Contact information

Donald D.B. Cane P.Eng.
	Title:   President
	Area of Responsibility:   Management Executive
	Telephone:   (905) 943-9600
	Fax:   (905) 940-5848
	Email:   dcane@segl.com

Company description

Simcoe Engineering is an environmental engineering consulting firm that has been in business since 1974. All engineering expertise is available in house for the completion of water, wastewater, stormwater, industrial wastewater, biosolids,petroleum, health services, SCADA, instrumentation and control and building projects.Awards received by Simcoe have included the following: 1996 Ajax Pickering Board of Trade Award; 1996 Award of achievement by the Society for Technical Commumication; 1995 Durham Region Bureau of Excellence Award; 1995 Caddie Award (still Image Practicing Professional; 1996 TAC Environmental Achievement Award; 1988 City of Mississauga Urban Design Award. Environmental Profile Simcoe Engineering Group limited was incorporated in 1982 as the successor company to Simcoe Engineering Limited, which was originally established in 1974 under the Business Corporations Act of Ontario. Simcoe Engineering Group Limited has provided environmental engineering for numerous clients since it was founded in 1974. Simcoe has designed new and expanded water treatment plants, and wastewater treatment plants and applied this knowledge base to industrial projects. Simcoe Engineering Group Limited's technical staff is of approximately 35, with 12 professional engineers, 8 technologists and technicians. The firm's principal fields of specialization include: Water and Wastewater; Solid Waste Management; Chemical, Mechanical, Municipal and Structural and Electrical engineering; Instrumentation and Controls and SCADA. Within these areas, Simcoe Engineering Group Limited can provide the following services: Assistance with government subsidies; Class environmental assessments; Commissioning; Computer programming and analysis; Construction inspection; Contract administration; Correction of defective control systems; Cost estimates; Detailed design; Environmental audits; Expert testimony; Feasibility studies conceptual designs; Infrastructure management systems; Municipal water/sewage rate structures; Obtaining approvals; Tender call and review. Alliances/Contacts Sought: Alliances on project specific basis; Joint Ventures.
Country of Ownership:	Canada
Year Established:	1974
Exporting:	Yes
Primary Industry (NAICS):	541330 - Engineering Services
Primary Business Activity:	Services
Total Sales ($CDN):	$1,000,000 to $4,999,999
Export Sales ($CDN):	$100,000 to $199,999
Number of Employees:	35

Product / Service / Licensing

Product Name:	Conventional water treatment plus microstraining, ozonation and granular activated carbon
In addition to conventional treatment, a microstrainer is used to remove algae. Ozonation is employed to reduce the treated water triholomethanes and to reduce taste and odour compounds. As well, granular activated carbon contractors are used for the same purpose. The total system includes: Raw water screening; low lift pumping; microstraining, coagulation/flocculation; sedimentation; ozonation; dual media filtration; granular activate carbon filtration; chlorination; high lift pumping and fluoridation. All the wastewater produced by the plant is treated on site, with off site sludge disposal. This treatment was successfully used in the South Sidney Water Treatment Plant, which implemented microstraining, ozonation and granular activated carbon to limit bad taste and odours in treated water.
Product Name:	Environmental Products and Services
Product Name:	Independent investigation documents accuracy and identifies corrective action
When a metering system is used for custody transfer or billing purposes, flows that are too low result in lost revenue, while flows that are too high result in customer dissatisfaction. Chemical feed systems for process or discharge treatment are usually paced to flow. Inaccuracies cause ineffective treatment or higher costs. Flow metering is also used for planning purposes, such as whether to expand a treatment or pumping facility. Inaccurate data will result in earlier capital investments or late construction of needed facilities. The solution to this problem is three-fold. A field investigation determines the true accuracy to the flow metering installation, and identifies potential sources of inaccuracy. Changes to equipment, installation arrangements, and preventive maintenance procedures follow to rectify the problem. A post-correction accuracy verification and maintenance training complete the program. Professionally trained personnel are provided, with specialized equipment and the experience to undertake independent flow calibration for liquid metering systems. Investigations with over 200 flow meters ranging from 3" to 96" diameter showed that accuracy was within ±2% in less than 20% of installations. Almost half the tested installations had accuracies worse than ± 5%, some in excess of ± 40%. Even if a customer's metering system is properly designed, installed, calibrated, and maintained, and examination by independent specialists can confirm and document the operation of the metering system.
Product Name:	Sludge storage facility
Sludge storage facility to hold sludge during this time frame (approx. 6 months). Currently the total volume of sludge storage is 666,000 m3. Storage was accomplished through the construction for 8-8250 m3 storage tanks with concrete walls and high density polyethylene membrane floors and floating covers. Following winter storage, the tank contents are mixed to re-suspend solids prior to the tanks being pumped empty. This is accomplished trough the use of five 20 HP mixers per tank, and a single 20 HP submersible pump.
Service Name:	CONSULTING ENGINEER - BUILDINGS-ACOUSTICS
Service Name:	CONSULTING ENGINEER - BUILDINGS-APARTMENTS
Service Name:	CONSULTING ENGINEER - BUILDINGS-COMMUNICATIONS
Service Name:	CONSULTING ENGINEER - BUILDINGS-EDUCATION
Service Name:	CONSULTING ENGINEER - BUILDINGS-ELECTRICAL
Service Name:	CONSULTING ENGINEER - BUILDINGS-HEATING/VENTILATION
Service Name:	CONSULTING ENGINEER - BUILDINGS-HOSPITALS
Service Name:	CONSULTING ENGINEER - BUILDINGS-HOTELS
Service Name:	CONSULTING ENGINEER - BUILDINGS-OFFICE BUILDINGS
Service Name:	CONSULTING ENGINEER - BUILDINGS-STRUCTURAL
Service Name:	CONSULTING ENGINEER - ENVIRONMENT-ENVIRONMENTAL STANDARDS
Service Name:	CONSULTING ENGINEER - ENVIRONMENT-FLOOD CONTROL
Service Name:	CONSULTING ENGINEER - ENVIRONMENT-IMPACT STUDIES
Service Name:	CONSULTING ENGINEER - ENVIRONMENT-POLLUTION CONTROL
Service Name:	CONSULTING ENGINEER - ENVIRONMENT-WASTE DISPOSAL/TREATMENT
Service Name:	CONSULTING ENGINEER - GEOLGY/GEOPHYSIC/SRVY-HYDROGEOLOGY
Service Name:	CONSULTING ENGINEER - INDUSTRY-FOOD
Service Name:	CONSULTING ENGINEER - INDUSTRY-MANUFACTURING
Service Name:	CONSULTING ENGINEER - MUNICIPAL-OTHER
Service Name:	CONSULTING ENGINEER - MUNICIPAL-SEWAGE DISPOSAL
Service Name:	CONSULTING ENGINEER - MUNICIPAL-WATER SUPPLY
water, wastewater, stormwater, industrial wastewater, biosolids,petroleum, health services, SCADA, instrumentation and control and building projects
Service Name:	CONSULTING ENGINEER - PETROLEUM & NATURAL GAS-OTHER
Service Name:	ENVIRONMENTAL CONSULTANT - AIR QUALITY-INDOOR AIR
Service Name:	ENVIRONMENTAL CONSULTANT - ALTERNATE ENERGY SOURCES
Service Name:	ENVIRONMENTAL CONSULTANT - ASBESTOS
Service Name:	ENVIRONMENTAL CONSULTANT - CONSULTING
Service Name:	ENVIRONMENTAL CONSULTANT - CONTINGENCY PLANNING FOR SPILLS
Service Name:	ENVIRONMENTAL CONSULTANT - ENERGY CONSERVATION AND RECOVERY
Service Name:	ENVIRONMENTAL CONSULTANT - ENGINEERING DESIGN/SPECIFICATIONS
Service Name:	ENVIRONMENTAL CONSULTANT - ENVIRONMENTAL AUDITS
Service Name:	ENVIRONMENTAL CONSULTANT - ENVIRONMENTAL IMPACT ASSESSMENTS
Service Name:	ENVIRONMENTAL CONSULTANT - EROSION CONTROL/LANDSLIDE PROTECTION
Service Name:	ENVIRONMENTAL CONSULTANT - FIELD SAMPLING AND MONITORING
Service Name:	ENVIRONMENTAL CONSULTANT - FLOOD PLAIN CONTROL
Service Name:	ENVIRONMENTAL CONSULTANT - HAZARDOUS WASTE-BIOCHEMICAL
Service Name:	ENVIRONMENTAL CONSULTANT - HAZARDOUS WASTE-CHEMICAL
Service Name:	ENVIRONMENTAL CONSULTANT - INDUSTRIAL WASTEWATER/SLUDGE
Service Name:	ENVIRONMENTAL CONSULTANT - INDUSTRY-CHEMICALS
Service Name:	ENVIRONMENTAL CONSULTANT - INDUSTRY-ELECTRIC UTILITIES
Service Name:	ENVIRONMENTAL CONSULTANT - INDUSTRY-PETROLEUM AND COAL PRODUCTS
Service Name:	ENVIRONMENTAL CONSULTANT - INDUSTRY-RUBBER AND PLASTICS
Service Name:	ENVIRONMENTAL CONSULTANT - NATURAL AREA PARKS, RECREATION AND TOURISM
Service Name:	ENVIRONMENTAL CONSULTANT - NOISE AND VIBRATION
Service Name:	ENVIRONMENTAL CONSULTANT - POTABLE WATER SUPPLY,TREATMENT,DISTRIBUTION
Service Name:	ENVIRONMENTAL CONSULTANT - SEWAGE COLLECTION AND TREATMENT
Service Name:	ENVIRONMENTAL CONSULTANT - SITE ASSESSMENT
Service Name:	ENVIRONMENTAL CONSULTANT - SOIL AND GROUNDWATER
Service Name:	ENVIRONMENTAL CONSULTANT - STORMWATER RUNOFF
Service Name:	ENVIRONMENTAL CONSULTANT - SYSTEMS MODELLING OR DESIGN
Service Name:	ENVIRONMENTAL CONSULTANT - TRAINING AND EDUCATION
Service Name:	ENVIRONMENTAL CONSULTANT - UTILITY RATE STUDIES
Service Name:	ENVIRONMENTAL CONSULTANT - WASTE TRANSPORT AND DISPOSAL
Service Name:	ENVIRONMENTAL CONSULTANT - WASTE TREATMENT
Service Name:	ENVIRONMENTAL CONSULTANT - WATER QUALITY

Market profile

Alliances:

• Financial
• Sales/Marketing
• Technology

Industry sector market interests:

• Agriculture
• Construction
• Environment
• Information Technology and Telecommunications
• Manufacturing
• Medical/Biotechnology/Chemical
• Mining/Petroleum/Gas
• Service Industry
• Food and Beverage Manufacturing
• Pulp and Paper
• Plastics and Rubber Products
• Primary and Fabricated Metal
• Textile and Clothing

Geographic markets:

Export experience:

• Brazil
• China
• Cuba
• Guatemala
• Mexico
• United States

Actively pursuing:

• Iran, Islamic Republic of