| GEN-01 — Measurement Canada Bulletins |
4 |
|
|
| GEN-02 — Adjustments of Devices by Measurement Canada Inspectors During Initial Inspections Conducted in the Field |
2 |
|
|
| GEN-03 — Adjustment of Devices by Inspectors |
|
|
|
| GEN-04 — Notices of Conditional Approval - Naming Convention, Terms and Conditions, Disclosure, Notification, Initial Inspection, and Inspection Certificates |
2 |
|
|
| GEN-06 — Application of New Specifications and Approval of Trade Measurement Devices that Incorporate Technologies not Covered by the Existing Specifications |
12 |
|
|
| GEN-08 — Calibration and Tolerance Testing of Standards Not Owned by Measurement Canada |
5 |
|
|
| GEN-09 — Delegation of Authorities |
3 |
|
|
| GEN-16 — Conformance with Industry Safety and Security Requirements |
2 |
|
|
| GEN-22 — Initial Inspection Markings |
1 |
|
|
| GEN-26 — Modifications to Approved Weighing & Measuring Devices and Electricity & Gas Meters |
1 |
|
|
| GEN-32—Inspection Fees for Marketplace Monitoring Activities |
1 |
|
|
| GEN-35 — Weighing and Measuring Machines Used in Non-Trade Applications, Including Excise |
|
|
|
| GEN-37 — Policy on the Loan of Publicly Owned Standards and Equipment |
1 |
|
|
| GEN-39 — Replacement Information and Information Plates |
|
|
|
| GEN-41 — Type Approval and Inspection of Devices: Clarification of What Is Considered Trade |
|
|
|
| V-01 — Hose Lengths on Fuel Dispensers for Motor Vehicles, Watercraft and Aircraft |
3 |
|
|
| V-02 — Gasoline and Diesel Fuels Dispenser Computing Limitations by the Gallon or Litre |
1 |
|
|
| V-03 — Controlled Conditions |
4 |
|
|
| V-04 — Initial Inspection of Meters Used to Measure Liquids |
|
|
|
| V-05 — Lubricating Oil Meters |
1 |
|
|
| V-06 — Industry-owned Volume Test Equipment |
2 |
|
|
| V-07 — Increment of Registration for Volumetric Liquid Meters |
1 |
|
|
| V-08 — Initial Inspection of Replacement Registers Equipped with Automatic Temperature, Pressure or Density Compensators |
2 |
|
|
| V-09 — Inspection of Gasoline and Diesel Fuel Dispensers and Refuellers at Authorized Service Providers' or Dealers' Premises |
4 |
|
|
| V-10 — Volume Correction Factors of Non-Petroleum Products Authorized For Use With Liquid Measuring Meters |
2 |
|
|
| V-11 — Propane Dispenser Approval, Installation and Inspection Policy |
2 |
|
|
| V-15—Manual Correction of Measured Liquid Volumes to Equivalent Volumes at Reference Conditions |
3 |
|
|
| V-16 — Classification of Liquids for the Approval of Liquid Meters |
3 |
|
|
| V-17 — Temperature Correction of Provers |
1 |
|
|
| V-18 — Selection of Volume Correction Factor Tables and Standard Density Values for Some Common Products |
8 |
|
|
| V-19 — Measurement Canada Policy on Use of Automatic Temperature Compensation |
1 |
|
|
| V-20 — Printer Requirements for Volumetric Liquid Meters Equipped with Automatic Temperature Compensation (ATC) |
1 |
|
|
| V-21 — Air Elimination Requirements for Bulk Meters |
1 |
|
|
| V-22 — Sealing Requirements for Liquid Volumetric Proving Standards |
1 |
|
|
| V-23 — Application of Limits of Error for Volume Devices |
1 |
|
|
| V-24 — Relevant Local Standards of Volume |
2 |
|
|
| V-25 — Initial Inspection of Electronic Registers which incorporate Multipoint Calibration Features, in Liquid Metering Systems |
|
|
|
| V-26 — Measurement Canada Policy for the Approval and Inspection of Ancillary Measurement Devices in the Downstream Petroleum Sector |
|
|
|
| V-27 — Content and Suggested Format for Retail Printed Receipts |
|
|
|
| V-28 — Blend Systems |
2 |
|
|
| V-29 — Legislative Rulings and Interpretations |
1 |
|
|
