Nuclear Energy

FirstPreviousNext

Canadian Nuclear Industry Capabilities Guide 2009–2010
N to O

Archived Content

Information identified as archived on the Web is for reference, research or recordkeeping purposes. It has not been altered or updated after the date of archiving. Web pages that are archived on the Web are not subject to the Government of Canada Web Standards. As per the Communications Policy of the Government of Canada, you can request alternate formats on the "Contact Us" page.

N.O.W. and Associates Inc.
N.O.W. and Associates Inc. has been providing fabrication, machining and assembly services to industry for 40 years. Our main activities are in the production of wire and cable machinery, chemical filtration machinery for the pulp and paper industry, and recycling machinery. We are also active in the steel industry, and nuclear components and tooling.

172 Bradwick Drive
Concord, Ontario L4K 1K8
Contact: Gordon Neuser, Operations Manager
Telephone: 905-669-2461
Email address: nowassoc@interlog.com

Contact: Jerry Armani, General Manager
Telephone: 905-669-2461

Capabilities

  • Materials and Manufactured Components
Return to Top of Page
Top of Page


Natural Resources Canada
Natural Resources Canada promotes the sustainable development and responsible use of Canada's natural resources. We are responsible for ensuring the energy future for Canada through developing policies and programs that enhance the economic and environmental well-being of Canadians. The Energy Sector of Natural Resources Canada is responsible for developing Canadian policy on all energy sources. The Nuclear Energy Division is the unit within the Energy Sector that develops and implements Canadian government policy on nuclear energy. It provides advice on energy policy, as well as institutional, legislative and financial frameworks for the nuclear industry in Canada. It also works closely with the Uranium and Radioactive Waste Division. The Uranium and Radioactive Waste Division provides expert technical, policy and economic information and advice to the Minister and the federal government on issues affecting Canadian uranium exploration, development, environmental protection, production, supply capability, foreign ownership, domestic and international markets, exports, international trade, and end uses. In addition, through the Office of Energy Research and Development, we support the advancement of nuclear-based energy systems by participating in the Generation IV International Forum.

580 Booth Street
Ottawa, Ontario K1A 0E8
Telephone: 613-995-0947

Capabilities

  • Public Services, Government, Associations and R&D
Return to Top of Page
Top of Page


Newman Hattersley Limited
Newman Hattersley Limited has developed and proven advanced valve technologies that meet demanding design and performance goals of next-generation nuclear power reactors. For over 50 years, we have worked closely with licensed and operating nuclear plants around the world to solve legacy valve problems. The resulting technologies have demonstrated greatly extended service intervals, while improving plant performance. Recently, in order to improve performance and customer service, the Nuclear Division of Thompson Valves (located in Poole, United Kingdom) was consolidated with Newman Hattersley into one business unit with two sites. Currently, we offer a product range that includes:

  • ball, bellows sealed globe and butterfly valves
  • gate globe and check valves
  • miniature valves
  • manifolds
  • needle valves
  • pressure reducing devices
  • pressure regulating valves
  • solenoid valves

We also offer full engineering support from application engineering and detailed specifications to design and inspection.

181 Superior Boulevard
Mississauga, Ontario L5T 2L6
Contact: Michael Krause, Operations Director
Telephone: 905-678-1240, extension 1210
Email address: mkrause@newmanhattersley.com

Capabilities

  • Engineering and Construction
  • Materials and Manufactured Components
  • Operation, Maintenance and Business Services
Return to Top of Page
Top of Page


Niagara Energy Products Corp.
Niagara Energy Products Corp. specializes in custom manufactured components for the energy and petrochemical industries in North America and overseas. We have assembled a strong team of dedicated employees who are willing to serve and meet our customers' needs. We offer:

  • flanges
  • nuclear reactor components
  • pipe and fittings
  • valve parts
  • valves

We also offer the following non-destructive and destructive testing services at our facility:

  • Non-Destructive
    • ultrasonic examination
    • radiography examination
    • magnetic particle examination
    • liquid penetrant examination
    • helium leak testing
    • hydrostatic leak testing
  • Destructive
    • impact testing
    • weld bend testing
    • mechanical testing
    • chemical testing
    • hardness testing
    • concrete compression testing

4749 Buttrey Street
Niagara Falls, Ontario L2E 7K7
Contact: Frank Carchidi, President
Telephone: 905-371-2500, extension 228
Email address: nepfg@vaxxine.com

Capabilities

  • Materials and Manufactured Components
  • Operation, Maintenance and Business Services
Return to Top of Page
Top of Page


Niagara Fasteners Inc.
Niagara Fasteners Inc. is a manufacturer of quality fasteners, bolts, studs and nuts to ASME Code requirements. We have threading to 6 feet diameter, CNC machining, hot forging capabilities, and quality systems to meet the requirements of NCA3800, CSA Z299.3-85 and ISO 9001–2000.

6095 Progress Street
P.O. Box 148
Niagara Falls, Ontario L2E 6S8
Contact: Dean Zaniol, Sales Manager
Telephone: 905-356-6887
Toll-free: 1-800-263-3602
Email address: rond@niagara.com

Capabilities

  • Materials and Manufactured Components
Return to Top of Page
Top of Page


NLI Canada
NLI Canada is an original equipment supplier serving only the nuclear power industry. We specialize in engineered solutions to safety-related equipment supply problems, using various strategies, including:

  • commercial grade dedication
  • equipment qualification
  • equipment modification
  • reverse-engineering
  • ASME III upgrading
  • custom design and manufacturing

We are partnered with various manufacturers to offer fully-qualified equipment, meeting all QA requirements. These QA programs include:

  • 10CFR50 Appendix B. CSA Z299.2-1985
  • ASME III Class 1, 2 and 3 valves
  • pumps
  • pressure vessels
  • appurtenances
  • support structures

380 Lake Road, Unit 5
Bowmanville, Ontario L1C 4P8
Contact: Gerry Waterhouse, Site Manager
Telephone: 905-623-1235
Email address: gwaterhouse@nuclearlogistics.com

Capabilities

  • Engineering and Construction
  • Materials and Manufactured Components
Return to Top of Page
Top of Page


Normac Adhesive Products Inc.
Normac Adhesive Products Inc. manufactures polyurethanes and polyurethane products. We also manufacture:

  • industrial adhesives
  • polyurethane bonding adhesives
  • polyurethane primer, urethane adhesives
  • bonding agents and epoxy primer for polyurethanes
  • rubber adhesive and bonding-castable urethanes
  • protective rubber lining

We supply many custom products for your specialized polyurethane or rubber requirements.

1350 Heine Court
Burlington, Ontario L7L 6M4
Contact: George MacGregor, President
Telephone: 905-332-6455
Email address: info@normacadhesives.com

Capabilities

  • Materials and Manufactured Components
Return to Top of Page
Top of Page


Nuclear Insurance Association of Canada
The Nuclear Insurance Association of Canada was established to respond to the emerging needs of atomic energy. We are a voluntary non-profit, unincorporated association of insurers, through which members may provide protection by participation in property and liability pools.

C/O CGI Insurance Business Services
150 Commercial Valley Drive West, Lock Box 200
Markham, Ontario L3T 7Z3
Contact: Dermot Murphy, Manager
Telephone: 905-695-6657
Email address: colleen.demerchant@cgi.com

Capabilities

  • Public Services, Government, Associations and R&D
Return to Top of Page
Top of Page


Nuclear Safety Solutions Limited
Nuclear Safety Solutions Limited — a subsidiary of AMEC — is a major provider of operating support and other services to nuclear utilities. With more than 30 years of experience, and an in-depth understanding of operational issues and their impact on unit performance, we assist our clients in maximizing the performance of their operating stations. We are the largest private nuclear consultancy in Canada. We have over 250 technical staff members, who are experts in providing value-added total safety and engineering solutions primarily to the nuclear industry. We are also a major provider of operational support and other services to the nuclear utilities.

700 University Avenue, 4th Floor
Toronto, Ontario M5G 1X6
Contact: Walter Thompson, Vice President, Commercial Operations
Telephone: 416-592-4349
Email address: walter.thompson@nuclearsafetysolutions.com

Capabilities

  • Operation, Maintenance and Business Services
Return to Top of Page
Top of Page


Nuclear Shielding Supplies and Service of Canada Ltd.
Nuclear Shielding Supplies and Service of Canada Ltd. has over 40 years of experience in providing high density concrete shielding products.

1079 Chambly Road, Suite 201
Longueuil, Quebec J4M 3M7
Contact: Jordy Ensio, Vice President
Telephone: 450-677-6333
Toll-free: 1-866-286-6311
Email address: jordye@nuclearshielding.com

Capabilities

  • Materials and Manufactured Components
Return to Top of Page
Top of Page


Nuclear Waste Management Organization
The Nuclear Waste Management Organization was established to recommend a long-term approach to managing used nuclear fuel, produced by Canada's electricity generators. Our three-year study engaged interested Canadians, stakeholders and specialists to develop a recommendation that safeguards the public, in a way that is sustainable, ethically and socially acceptable, as well as respectful of the environment now and in the future. On June 14, 2007, the Government of Canada selected our recommended approach — Adaptive Phased Management. We move toward a goal Canadians have themselves identified: safe and secure long-term storage of the used nuclear fuel we produce, and the flexibility for future generations to act in their own best interests. We are now tasked with implementing the Adaptive Phased Management.

22 St. Clair Avenue East, 6th Floor
Toronto, Ontario M4T 2S3
Contact: Ken Nash, President and Chief Executive Officer
Telephone: 416-934-9814
Toll-free: 1-866-249-6966 (within Canada)
Email address: info@nwmo.ca

Capabilities

  • Public Services, Government, Associations and R&D
Return to Top of Page
Top of Page


Nu-Tech Precision Metals Inc.
Nu-Tech Precision Metals Inc. is a manufacturer of seamless tube, pipe, fittings, round bar, flat bar, structural shapes and machined components. We also fabricate nuclear assemblies, including pressure boundary components. We have TSSA certifications as a material organization, fitting manufacturer and appurtenance manufacturer. Our main materials of manufacture include: zirconium, titanium, steels, hafnium, nickel and copper alloys. Specific products for CANDU reactors include:

  • pressure tubes
  • feeder pipe
  • feeder elbows
  • liner tubes
  • calandria inserts
  • bodies
  • flow tubes and fuel adaptors
  • flux detector assemblies
  • adjustor
  • shutoff
  • control rod housings

Our work on research reactors, and PWR and BWR includes zirconium and hafnium piping assemblies, flow tubes, housings and control rod components.

460 McCartney Street
P.O. Box 7
Arnprior, Ontario K7S 3H2
Contact: Sandye Hook, Sales Manager
Telephone: 613-623-6544
Email address: sandye.hook@nutechprecisionmetals.com

Capabilities

  • Materials and Manufactured Components
  • Public Services, Government, Associations and R&D
Return to Top of Page
Top of Page


ODIM Numet Ltd.
ODIM Numet Ltd. specializes in the design, development and manufacture of high-reliability, precision-engineered systems and equipment for the nuclear energy and hazardous waste management sectors. Since 1974, our team of highly skilled engineers and manufacturing professionals have built a solid reputation for innovative, cost-effective solutions for a wide variety of nuclear industry challenges. Our philosophy to provide the highest reliability and quality in all our products and services continues to guide all of our activities.

678 Neal Drive
Peterborough, Ontario K9K 2A3
Contact: Paul Whiteman, Technical Sales Supervisor
Telephone: 705-743-2708, extension 174
Email address: paul.whiteman@odimnumet.com

Contact: Glen Crawford, Director of Marketing
Telephone: 705-743-2708, extension 141
Email address: glen.crawford@odimnumet.com

Capabilities

  • Engineering and Construction
  • Materials and Manufactured Components
  • Operation, Maintenance and Business Services
  • Public Services, Government, Associations and R&D
Return to Top of Page
Top of Page


ODIM Spectrum
ODIM Spectrum provides services to clients, such as project management; engineering analyses; prototype design, development and testing; supply of automated systems, custom tooling, robotic end effectors, radiation monitoring systems and unique detection equipment.

597 The Queensway
Peterborough, Ontario K9J 7J6
Contact: Keith Furevick, Director, Business Development
Telephone: 705-743-9249, extension 281
Email address: kfurevick@odim-spectrum.com

Capabilities

  • Engineering and Construction
  • Materials and Manufactured Components
  • Operation, Maintenance and Business Services
Return to Top of Page
Top of Page


OneCAD Solutions Ltd.
OneCAD Solutions Ltd. is a wholly owned and operated Canadian engineering services company. Our purpose is to provide the Canadian nuclear industry with the personnel and skills that will seamlessly integrate with their current engineering and design workforces in times of increased demand. We offer contract design services on a short or long term basis, in the form of engineers, designers and CAD technicians, to suit the level of expertise and experience required. We own licenses of the latest CAD softwares and our staff members are available on-site or remotely from our Markham offices.

60 Centurian Drive, Suite 100
Markham, Ontario L3R 9R2
Contact: Neil Thomas, President
Telephone: 905-943-7667
Email address: neil@onecad.com

Contact: Paul Sesto, Business Manager
Telephone: 905-943-7667
Email address: paul@onecad.com

Capabilities

  • Engineering and Construction
  • Operation, Maintenance and Business Services
Return to Top of Page
Top of Page


Ontario Power Generation
Ontario Power Generation is an Ontario-based electricity generation company, whose principal business is the generation and sale of electricity in Ontario. Our focus is on the efficient production and sale of electricity from our generation assets, while operating in a safe, open and environmentally responsible manner. Our generating portfolio has a total capacity of over 22 000 megawatts, making us one of the largest power generators in North America. Our generating assets include three nuclear generating stations.

889 Brock Road, Suite P826A-1
Pickering, Ontario L1W 3J2
Contact: Tom Mitchel, Chief Nuclear Officer
Telephone: 905-839-6746, extension 5294
Email address: tom.mitchel@opg.com

Capabilities

  • Engineering and Construction
  • Operation, Maintenance and Business Services
  • Public Services, Government, Associations and R&D
Return to Top of Page
Top of Page


Organization of CANDU Industries
The Organization of CANDU Industries exists to promote a healthy nuclear power industry in Canada for the benefit of their members. Our membership consists of over 100 companies located primarily in Ontario, but also in Quebec, New Brunswick and British Columbia. It consists of almost equal numbers of large, medium and small organizations, employing some 7 000 people who supply numerous goods and services for the CANDU nuclear market in Canada and abroad. Many companies also supply to other nuclear markets that use Light Water Reactor (LWR) and Boiling Water Reactor (BWR) technologies. We promote the nuclear industry in Canada through a number of activities during the year, such as supplier days, seminars, trade shows, media liaison, public and government liaison, and interaction with the nuclear utilities, designers, regulators and many other industry stakeholders. We also interact with McMaster, University of Ontario Instutute of Technology, École Polytechnique and Univer-sity of New Brunswick to provide a bursary award to students each year.

345 Kingston Road
Pickering, Ontario L1V 1A1
Contact: Doctor Neil Alexander, President
Telephone: 905-509-0073
Email address: neil.alexander@oci-aic.org

Capabilities

  • Public Services, Government, Associations and R&D
FirstPreviousNext